Peel back the foil on a fresh jelly cup and you find something that looks more like frosting than paint. That thick body is the key to learning how to use HIMI gouache paint well: you do not paint straight from the cup the way you might with a fluid tube gouache. You transfer a small amount to a palette, loosen it with measured drops of water to the consistency your stroke needs, and work from light planning to dark details, keeping layers thin so nothing cracks or lifts.
Quick answer: To use HIMI gouache, scoop a pea-sized amount from each jelly cup onto a palette with a clean tool, add water a few drops at a time until it reaches a “melted ice cream” consistency for flat opaque fills (thinner for washes), paint on heavy paper (at least 200 gsm, ideally 300 gsm), let each layer dry 5 to 15 minutes, and use light, single strokes over dry layers so the rewettable paint underneath does not lift. Close every cup tightly after use.
This guide works as a beginners guide to gouache using the jelly cup format specifically, with a materials list, timed steps, a consistency chart and fixes for the problems people hit in their first few paintings. If you have not chosen a set yet, the HIMI gouache set review compares the 18, 24 and 56 color options.
What Makes HIMI Jelly Cups Different to Work With
Three traits shape every step below, so it is worth understanding them before you start.
- Thick starting body. HIMI paint usually comes out of the cup as a dense paste. Straight from the cup it can drag, streak and crack when it dries in thick ridges. Nearly every technique starts with adding water.
- Rewettable when dry. Like other traditional gouache, dried HIMI reactivates with water. That is great for blending and corrections, and it is the reason heavy scrubbing over a dry layer muddies colors.
- Dry shift. Gouache often dries slightly different from how it looks wet: lights may dry a touch darker and darks a touch lighter. A swatch chart helps you predict this.
Keep those three ideas in mind and most “why does my gouache look bad” moments become easy to diagnose.
Materials You Need
You do not need much beyond the set itself, but a few supporting items make a large difference to results.
- HIMI jelly cup set (any size; 24 colors is a comfortable starting range).
- Paper: watercolor paper or mixed-media paper of 200 to 300 gsm (about 90 to 140 lb). Thin sketch paper buckles and pills under the water you need to loosen the paint.
- Palette: a ceramic plate, a porcelain palette or a plastic palette with wells. A flat area is useful for mixing opaque tints.
- Palette knife or small scoop: a plastic or metal palette knife, or a clean craft stick, for moving paint out of the cups.
- Brushes: a flat brush (around 1/2 inch) for fills, a round size 4 to 6 for general work, and a small round or liner (size 0 to 2) for details. Synthetic brushes work well with gouache.
- Two water jars: one for rinsing, one kept clean for mixing.
- Spray bottle or dropper: to add water in controlled amounts and keep palette paint moist.
- Paper towels for blotting brushes.
- Masking tape to tape paper down and reduce buckling.
- Pencil and kneaded eraser for a light sketch.
How to Use HIMI Gouache Paint: Step by Step
The following sequence takes a small painting, roughly 5 × 7 inches, from blank paper to finished piece. Total time is typically 60 to 90 minutes including drying.
Step 1: Swatch the set before painting (20 to 30 minutes, once)
Before your first painting, paint a small square of every color on a sheet of the paper you plan to use. Paint each square half thick and half thinned. Label them with the names from the case. Once dry, compare against the cups. This one-time chart shows the dry shift and reveals which colors are more transparent than others, something HIMI packaging does not tell you.
Step 2: Prepare the cups (2 to 5 minutes)
Open only the colors you plan to use. If a cup is new, peel the foil fully. If the surface of an older cup has started to skin over, mist it lightly and close it for 10 minutes before use. Never dip a wet, dirty brush directly into a cup; that contaminates the color and adds water that encourages mold over time.
Step 3: Transfer and loosen the paint (3 to 5 minutes)
Using a palette knife, place a pea-sized amount of each color on your palette. Add water with a dropper or wet brush, a few drops at a time, and mix thoroughly. Aim for the consistency you need for the first layer, usually the “melted ice cream” texture described in the chart below. Mix more than you think you need for large flat areas; re-mixing a matching color halfway through a fill is harder than it sounds.
Step 4: Tape the paper and sketch (5 minutes)
Tape all four edges of your paper to a board. Draw a light outline with minimal shading. Gouache is opaque enough to cover pencil, but dark graphite can smear into light colors, so lift heavy lines with a kneaded eraser first.
Step 5: Block in the largest shapes (10 to 15 minutes)
Paint the background and big color masses first with your flat brush, using one or two confident passes. Do not go back into a fill while it is half dry; that is the main cause of streaks. If the coverage looks patchy, wait until it is fully dry and apply a second thin layer rather than one thick one.
Step 6: Let the layer dry (5 to 15 minutes)
Thin layers on heavy paper usually feel dry within 5 to 10 minutes; thicker areas and humid rooms push this toward 15 minutes or more. Touch the back of your finger lightly to an edge: if it feels cool, it is still damp. A hair dryer on low, held at a distance, speeds things up.
Step 7: Build midtones and shapes (15 to 20 minutes)
Mix midtone values and paint the secondary shapes. Use a light touch and load the brush fully so the stroke deposits paint instead of scrubbing. For each new layer, the paint should be slightly thicker than the layer beneath it; thick-over-thin helps coverage without disturbing what is underneath.
Step 8: Add details and highlights (10 to 15 minutes)
Switch to a small round or liner. For crisp highlights, use white or a light tint at a slightly thicker, “soft yogurt” consistency. Place each detail in one stroke if possible. Repeated passes can pick up the color underneath and turn your white grey.
Step 9: Clean up and close the cups (5 minutes)
Snap every lid shut. Leftover palette paint can be left to dry and reactivated later with water, which is one advantage of traditional gouache. Rinse brushes thoroughly in clean water; dried gouache in the ferrule shortens brush life.
Water-to-Paint Consistency Guide
Consistency matters more than any other variable with jelly cup gouache. The ratios below are approximate starting points for a pea-sized amount of paint; adjust by eye.
| Consistency | Approximate mix | What it looks like | Best for |
|---|---|---|---|
| Thick paste | Straight from cup | Holds peaks, drags on paper | Small impasto touches only; prone to cracking |
| Soft yogurt | 1 to 2 drops of water | Holds a soft shape, flows off brush slowly | Highlights, crisp details, covering dark layers |
| Melted ice cream | 3 to 5 drops | Creamy, spreads easily, still fully opaque | Flat fills, backgrounds, most general painting |
| Light cream | 6 to 10 drops | Slightly translucent, flows freely | Soft gradients, glazing a tint over dry color |
| Watercolor-like wash | Generous water | Transparent, stains the paper | Underpainting, sky washes, tonal sketches |
A useful check: drag a loaded brush across scrap paper. If the stroke shows streaks of paper through it, add a touch more paint; if it leaves a raised ridge, add a drop of water.
Gouache Tips and Tricks for Jelly Cups
These habits address the specific behavior of HIMI’s thick body and rewettable finish.
- Mix colors on the palette, not in the cup. Keeps each cup pure for future paintings.
- Use white strategically. HIMI’s white is very opaque, so a tiny amount shifts a mix a lot. Add color to white, not white to color, when making tints; it saves paint and control.
- Mist your palette. Gouache on a palette starts to stiffen within 10 to 20 minutes. A light mist every so often keeps mixes workable.
- Make a value scale first. Mixing five steps from white to your darkest color clarifies values before you paint the real thing.
- Use a flat brush for flat color. Round brushes leave visible stroke marks in fills; a flat brush loaded fully gives cleaner, matte areas.
- Paint wet-in-wet only in small areas. Gouache dries quickly enough that large wet blends become streaky. Blend small sections at a time.
- Layer dark over light, then correct with opaque light. Unlike watercolor, you can paint light over dark, but thin it slightly and use one stroke.
- Keep a “dirty” and “clean” water jar. Grey rinse water is the hidden cause of dull mixes.
Common Problems and Quick Fixes
| Problem | Likely cause | Fix |
|---|---|---|
| Cracking when dry | Paint applied too thick, often straight from the cup | Thin to “melted ice cream” and build with several thin layers |
| Streaky flat areas | Paint too thin, or reworking while half dry | Thicker mix, fewer passes, second coat only after full dry |
| Muddy or grey colors | Lifting the dry layer below, or dirty rinse water | Lighter touch, one-stroke layers, fresh mixing water |
| Chalky pastels | Too much white in the mix | Use less white, or add a little of the pure color back |
| Paper buckling or pilling | Paper too thin for the water used | 300 gsm paper, tape edges, avoid scrubbing |
| Cup has dried hard | Lid left open or loose | Add a few drops of water, seal, wait several hours, then stir |
| Mold or sour smell in a cup | Dirty water introduced, warm storage | Discard the affected cup; avoid dipping brushes into cups |
Reviving and Storing HIMI Cups
Dried cups are the most frequent complaint about the jelly format, and almost always fixable.
- Add 3 to 5 drops of clean water to the surface of the hardened paint.
- Close the lid firmly and leave it for several hours or overnight.
- Stir with a clean palette knife. If it is still stiff, repeat with a couple more drops.
- Avoid overflooding, which leaves the paint watery and prone to separating.
For storage, keep the case flat, closed and away from sunny windowsills or heaters. If you live in a dry climate, check cups every few weeks and add a drop of water to any that look like they are shrinking from the edges.
Paper and Surface Choices
Gouache is forgiving, but surface choice still changes the result.
- Cold-press watercolor paper (300 gsm): holds up to layering and slight lifting; the texture adds visible grain.
- Hot-press watercolor paper: smooth, ideal for flat illustration fills and fine details; scans cleanly.
- Mixed-media paper (200 gsm and up): a budget option for practice; tape it down well.
- Toned paper: HIMI’s opacity works well on grey or tan paper, where light colors pop.
- Sketchbooks: choose ones labeled for wet media; standard drawing paper wrinkles quickly.
Practice Exercises for Your First Week
Short, focused exercises build control faster than jumping straight into complex scenes.
- Flat swatch grid (15 minutes): paint 1-inch squares as evenly as you can. Goal: no streaks, no ridges.
- Value scale (15 minutes): five steps from white to a dark color mixed with blue and brown.
- Gradient sky (20 minutes): blend two blues and white across a 4-inch strip using small wet sections.
- Simple still life (45 minutes): a mug or fruit with a background, a midtone, a shadow and one highlight.
- Light-over-dark test (15 minutes): paint a dark square, let it dry, then add white dots with one stroke each to practice clean highlights.
When Jelly Cups Are the Right Tool and When They Are Not
HIMI’s generous volume makes it ideal for practicing these skills without worrying about cost. It works well for sketchbooks, illustration meant for scanning and learning color mixing. If you later want published pigment data and lightfastness for finished, displayed work, a professional tube gouache is the natural next step. To understand that trade-off in detail, read our comparison of HIMI gouache versus Winsor & Newton Designers Gouache.
FAQs
Do you need to add water to HIMI gouache?
Usually yes. HIMI comes out of the cup as a thick paste, and a few drops of water bring it to a creamy, spreadable consistency that covers evenly and is less likely to crack.
Can you use HIMI gouache like watercolor?
Thinned heavily with water, it behaves somewhat like watercolor and can be used for underpaintings and washes. It will look less luminous than true watercolor because of the white filler in gouache.
How long does HIMI gouache take to dry?
Thin layers on heavy paper usually feel dry in 5 to 10 minutes. Thick areas and humid conditions can take 15 minutes or longer.
Why does my HIMI gouache crack?
Cracking almost always comes from applying paint too thickly. Thin it with water and build coverage with two thin layers instead of one heavy one.
Can you paint light colors over dark with HIMI gouache?
Yes, that is one of gouache’s strengths. Use a slightly thick light mix and apply it in a single stroke so you do not reactivate the dark color underneath.
What paper is best for HIMI gouache?
Watercolor or mixed-media paper of at least 200 gsm, ideally 300 gsm. Hot-press gives flat, smooth fills; cold-press adds texture.
Next Step
With the steps, consistency guide and fixes above, you can get clean, opaque results from jelly cup gouache from your first painting. If you are still deciding which set size or bundle to start with, see our breakdown of whether the HIMI jelly cup sets are worth buying, and for background on the brand and pricing, read where HIMI gouache is made.



