A palette cup is a small metal or plastic container that clips onto the edge of your palette so medium and solvent sit within a brush-length of your paint. The choice in the double vs single palette cup question comes down to how many liquids you dip into while painting. A single cup holds one. A double cup joins two side by side on one clip, usually solvent in one and medium in the other.
Neither style is better in general. They suit different medium systems, palette types, and painting situations, which is why our main guide to oil painting medium cups includes both formats. Below is a side-by-side comparison, then a verdict for each common setup so you can match the cup to the way you actually paint.
Quick answer: Choose a double palette cup if you regularly use two liquids during a session, such as solvent plus a painting medium, or a lean medium plus a fat medium for fat-over-lean layering. It keeps both on one clip and saves palette edge space. Choose a single cup if you use one medium only, paint solvent-free, need a larger capacity, or use a light handheld palette that might tip under a heavier double cup. Many painters end up with one double cup or two singles; two singles offer the most flexibility in placement.
What Each Cup Style Looks Like
Single palette cup
One small container, often round, fitted with a spring or slide clip on the side. Diameters commonly range from around 1.5 to 2.5 inches, and depths vary from shallow dipping wells to deeper cups that hold more liquid. Many come with screw-on or press-fit lids.
Double palette cup
Two cups mounted side by side on a single bridge with one clip, sometimes with matching lids. The cups are usually the same size, though some designs pair cups of different sizes. Because both share one clip, the whole unit attaches at a single point on the palette edge.
Double vs Single Palette Cup: Side-by-Side Comparison
| Factor | Single palette cup | Double palette cup |
|---|---|---|
| Liquids held | One | Two |
| Typical use | One medium, or solvent only | Solvent + medium, or lean + fat medium |
| Palette edge space | Small per cup, but two singles need two clip points | One clip point for two liquids |
| Weight on palette edge | Light | Heavier, more leverage on the clip |
| Stability on handheld palettes | Good | Can tip lighter palettes when full |
| Placement flexibility | High; position each cup separately | Fixed; both liquids sit side by side |
| Cross-contamination risk | Low | Slight; drips can cross the gap between cups |
| Capacity options | Wide range, including larger cups | Usually smaller per cup |
| Cleaning | Simple | Bridge and joint can trap dried medium |
| Plein air packing | Compact, easy to stow | Bulkier, but one item to remember |
Why the Number of Liquids Matters
The right cup depends on your medium system, so it helps to know what painters typically keep in them. Oil painters may dip into a solvent to thin early layers, a medium to adjust flow and drying, or two different mediums for lean and fat stages. If you are still sorting out what those liquids are, our explainer on what an oil medium is and how each type changes paint covers oils, solvents, alkyds, and gels.
Here is how common systems map to cup choice:
- Solvent only for thinning, no medium: one single cup.
- One all-purpose medium, no solvent at the palette: one single cup.
- Solvent plus medium: a double cup, or two singles.
- Lean medium plus fat medium: a double cup, clearly labeled sides.
- Solvent, lean medium, and fat medium: a double cup plus a single, or three singles.
- Solvent-free with a single oil or gel: one single cup, possibly a shallow one.
For painters following fat-over-lean, a double cup makes the stages easy to see at a glance: one side leaner, one side fatter. Our guide on how much medium to use per layer explains typical ratios for each stage, which helps decide what goes in each side.
Practical Differences You Notice While Painting
Reach and brush path
With a double cup, both liquids sit in one spot, so your brush always travels to the same part of the palette. With two singles, you can place solvent on the far side and medium near your mixing area, which some painters find reduces accidental dips into the wrong liquid.
Balance on handheld palettes
A full double cup puts more weight at one point on the palette edge. On a heavy studio palette this is irrelevant. On a lightweight handheld wooden or plastic palette, it can make the palette feel tip-heavy and increase the chance of the clip slipping. Two singles spread the weight; one single barely registers.
Capacity
Palette cups are for dipping, not for brush washing. Even so, larger single cups hold more medium for long sessions or big glazes, while double cups often have smaller individual reservoirs. If you find yourself refilling a cup several times per session, a larger single for the most-used liquid may help. For a broader look at cup sizes, materials, and lids, see our guide to palette cups for oil mediums and solvents.
Contamination
Medium picks up pigment from your brush every time you dip. In a double cup, a dripping brush passing over one side can drop paint or solvent into the other. Keeping a consistent order, for example always dipping the leaner side first, and wiping the brush on a rag between dips limits this.
Materials, Clips, and Lids: What Applies to Both Styles
The single vs double decision sits on top of a few features that matter regardless of style.
- Material: stainless steel resists corrosion and cleans easily. Aluminum is lighter but can dent and may react with some substances over time. Brass is traditional but can tarnish. Plastic is light and cheap but may be affected by certain solvents, so check compatibility.
- Clip width: clips are designed for a range of palette thicknesses. Measure your palette edge before choosing; a clip that is too loose slides, and one that is too tight will not fit.
- Clip design: spring clips adjust to different thicknesses, while fixed slots are simpler but less flexible.
- Lids: screw lids seal better for transport and overnight storage; press-fit lids are quicker but can leak if knocked. Some cups have no lids at all, which suits painters who empty and wipe them after every session.
- Rim shape: a lip or inward rim reduces splashing and helps wipe excess liquid from the brush.
When Clip-On Cups Do Not Fit Your Palette
Glass palettes set into a table, large tabletop palettes, and paper palette pads often have no usable edge for a clip. In those cases, consider freestanding options: small weighted cups, cups with flat bottoms, or a small lidded jar set on the table. The single vs double distinction still applies; you simply place them rather than clip them. Some painters set a double cup on a small scrap board and clip it there.
How to Set Up Palette Cups for a Session
A few minutes of setup makes either style work better and reduces spills and mix-ups.
- Check the clip fit. Slide the cup onto the palette edge before filling it. It should grip firmly without forcing. If it wobbles, a thin strip of tape or cork on the palette edge can tighten a loose clip.
- Decide on positions. Place cups on the side of your dominant hand, near but not inside the mixing area. With a double cup, put the liquid you use most on the side closest to your mixing area.
- Label the sides. A small piece of tape marked “S” for solvent and “M” for medium, or “lean” and “fat,” prevents dipping into the wrong liquid when you are focused on the painting.
- Fill halfway. Cups filled to the brim spill when the palette moves and contaminate faster. About half full is plenty for dipping; top up as needed.
- Keep a rag within reach. Wipe the brush before dipping into medium so pigment stays out of the cup.
- Close or empty at the end. Cap lidded cups straight away. Empty lidless ones into a closed waste jar and wipe them clean.
Common Mistakes With Palette Cups
- Using the solvent side to rinse brushes. The small volume turns cloudy within minutes, and that dirty solvent then thins your paint. Keep a separate brush washer for cleaning.
- Leaving medium uncovered overnight. Oils skin over and alkyd mediums thicken, wasting medium and leaving residue that is hard to clean.
- Overloading a light palette. A full double cup on a thin handheld palette can tip it or slide off. Use a single or move the cup closer to your thumb hole for balance.
- Mixing up lean and fat. Unlabeled cups make it easy to use the wrong liquid in a late layer. Labels cost nothing and protect the painting structure.
Verdict by Use Case
Studio oil painter using solvent and one medium
Double cup. It keeps both liquids together and frees the rest of the palette edge. On a sturdy palette, the extra weight is not an issue.
Painter following a structured fat-over-lean system
Double cup, labeled. Seeing lean and fat side by side makes it easier to keep layers in the right order. Add a single cup if you also keep solvent at the palette.
Solvent-free painter
Single cup. With one oil or gel, a second cup adds weight and cleaning without benefit.
Alla prima painter using little or no medium
Single cup, or none at all. A small shallow cup is enough for occasional dips.
Plein air painter with a pochade box or handheld palette
Single cup with a secure screw lid, or a compact double if you truly need two liquids. Weight and leak resistance matter more than convenience outdoors.
Painter using a glass tabletop palette
Freestanding single cups or jars. Clip-on designs need a usable edge; without one, place separate containers where they suit your brush path.
Beginner unsure of a medium system
Double cup. It covers the most common starter setup of solvent plus one medium, and you can leave one side empty if you only use one liquid for now.
Cleaning and Care
- Empty and wipe cups after each session unless you have a sealing lid.
- Do not pour solvent or medium down the drain. Let solids settle in a closed jar, decant clear solvent for reuse, and dispose of sludge according to local hazardous waste guidance.
- Wipe the bridge and clip of a double cup regularly; dried medium there can make the clip stiff.
- Rags used to wipe drying oils and mediums can self-heat. Dry them flat outdoors or store them in a sealed metal container with water before disposal.
- If a lid sticks, soak the rim briefly in a little solvent or warm soapy water, depending on what dried on it.
FAQs
What is a double palette cup used for?
It holds two liquids on one clip, most often solvent in one side and painting medium in the other, or a lean medium and a fat medium for fat-over-lean layering.
Do I need a palette cup for oil painting?
Not strictly, but it is the most convenient way to keep medium or solvent within reach of your mixing area. Any small, stable container can work, though clip-on cups are less likely to spill.
Can I use a palette cup for washing brushes?
Palette cups are too small for effective brush washing. Use them for dipping, and clean brushes in a separate brush washer jar or container.
Are two single palette cups better than one double?
Two singles give more placement flexibility and spread the weight, which helps on light palettes. A double uses one clip point and keeps both liquids together. It comes down to palette type and preference.
What size palette cup should I get?
For most dipping, a cup around 1.5 to 2 inches across is enough. Choose a larger single cup if you use a lot of medium for glazing or work long sessions without refilling.
What material is best for palette cups?
Stainless steel is widely preferred because it resists corrosion and cleans easily. Plastic is lighter but can be affected by some solvents, so check compatibility.
Next Step
Once you know whether one liquid or two sits at your palette, the remaining choices are size, material, lid style, and clip fit. Compare options in our roundup of top palette cups for oil painting mediums.



