How to Use the Selection Tool in Procreate: Modes and Workflows

How to Use Selection Tool in Procreate

Quick answer: Tap the S-shaped ribbon icon in Procreate’s top toolbar to open the Selection tool, then choose a mode: Automatic (tap to select similar colors), Freehand (draw or tap points around an area), Rectangle or Ellipse. Once an area is selected, painting, adjustments and Transform only affect that area. Use the bottom toolbar to add to, subtract from, invert, feather, save or fill your selection.

Selections are how you tell Procreate “only change this part.” Recolor a shirt, move an eye that sits too high, keep a gradient inside the sky or cut out a figure for a new background. Each task starts with the same tool. Learning how to use the selection tool in Procreate well is one of the quickest ways to make edits feel precise instead of messy.

Below you will find each selection mode explained, every button in the selection toolbar, practical workflows and fixes for the problems people run into most.

Opening the Selection Tool

The Selection tool sits in the top-left toolbar between the Adjustments wand and the Transform arrow. Its icon looks like a stylized S. Tap it and a toolbar appears at the bottom of the screen with four modes on the left and editing options on the right.

Everything outside the selection is covered by a moving diagonal-stripe pattern. That pattern shows the protected area. You can change how visible it is in Actions, then Prefs, under Selection Mask Visibility.

A selection is temporary. It does not create a new layer or change any pixels by itself; it simply sets a boundary for whatever you do next. That next action might be painting, erasing, an adjustment, a fill or Transform. Keeping this in mind clears up most confusion, because when nothing seems to happen, the cause is usually that the selection and the active layer do not overlap.

Selections apply to the active layer only. If your subject is spread across several layers, you can merge copies of them first or make the selection once and switch layers, since the selection persists while you change the active layer. Desktop programs often go further with selection features, and our roundup of desktop alternatives to Procreate notes which Windows apps include extras like magnetic lassos.

The Four Selection Modes

ModeHow you use itBest for
AutomaticTap a color; drag left or right to change the thresholdFlat-colored areas, clean line art regions
FreehandDraw an outline, or tap to place straight-edged pointsOrganic shapes, loose cut-outs, polygons
RectangleDrag a boxPanels, frames, rectangular crops
EllipseDrag an oval; touch with a second finger for a perfect circleEyes, moons, plates, vignettes

Automatic selection

Tap anywhere and Procreate selects connected pixels of a similar color. Without lifting your finger, slide right to increase the Selection Threshold (a broader selection) or left to decrease it (tighter). Watch the blue highlight to see what will be included.

Automatic mode looks at the current layer unless a layer is set to Reference, in which case it uses that layer’s boundaries. This makes it extremely useful for selecting regions inside line art. For more on that setup, see our guide on adjustment layers in Procreate, which uses selections to target edits.

Freehand selection

Draw around an area with your stylus as if tracing it. Procreate closes the shape when you return to the start point (or tap the gray starting dot). You can also tap to place points, which connects them with straight lines. Mixing the two works well for shapes with straight and curved edges, like a building with a rounded awning.

Rectangle and Ellipse

Drag to draw the shape. For Ellipse, placing a second finger on the screen while dragging constrains it to a circle. These are quick for geometric elements and for creating vignettes when combined with Feather.

The Selection Toolbar Buttons

On the right of the bottom bar are the editing options. Here is what each does:

  • Add: new shapes you draw are added to the current selection.
  • Remove: new shapes subtract from the selection.
  • Invert: swaps selected and unselected areas.
  • Copy and Paste: copies the selected pixels to a new layer in one tap.
  • Feather: softens the edge of the selection by a set amount.
  • Save and Load: stores a selection to reuse later in the session.
  • Color Fill: fills any selection you draw with the current color automatically.
  • Clear: removes the selection so you can start again.

Add and Remove work with any mode. A common pattern is to make a rough Automatic selection, then switch to Freehand with Remove active to trim away an area that was included by mistake.

How to Use the Selection Tool in Procreate: Core Workflows

Recolor one area without touching the rest

  1. Select the layer containing the area.
  2. Tap Selection, choose Automatic and tap the area. Adjust threshold until it is fully selected.
  3. Tap the Adjustments wand and choose Hue, Saturation, Brightness.
  4. Slide the Hue control. Only the selected area changes.

Move or resize part of a drawing

  1. Choose Freehand and draw around the part you want to move, such as an eye or hand.
  2. Tap the Transform arrow.
  3. Drag to move, use corner nodes to scale, and the green node to rotate. Choose Uniform to keep proportions.
  4. Tap Transform again to finish.

Procreate fills the vacated area with transparency, so you may need to patch the gap. Copying the selection to a new layer before transforming avoids holes, because the original stays behind.

Paint inside a shape

Make your selection, then switch to the brush. Strokes will only appear inside the selected area. This is ideal for gradients in a sky, texture inside a garment or rim light along one side of a face.

Cut out a subject onto its own layer

  1. Select the subject with Freehand or Automatic.
  2. Three-finger swipe down to open the Copy and Paste menu, then tap Cut and Paste. The subject moves to a new layer.
  3. Paint a new background on the layer underneath.

Create a soft vignette

  1. Choose Ellipse and drag an oval slightly smaller than the canvas.
  2. Tap Invert so the edges are selected.
  3. Tap Feather and set a generous amount.
  4. Add a new layer, select a dark color and fill or airbrush. Lower opacity to taste.

Feathering: How Much Is Enough?

Feather converts a hard edge into a gradual one. Small amounts soften the transition just enough to avoid a “cut out” look. Larger amounts create a glow or fade. The right amount depends on canvas size: the same feather value looks softer on a small canvas than a large one.

A practical method is to start low, make your edit, check at 100 percent zoom and undo to try a higher value if the edge still looks hard. Feathering is applied to the current selection, so draw the full shape first, then feather.

Saving and Reusing Selections

Complex selections take time. Tap Save and Load, then the plus icon, to store one. You can return to it later and tap it to reload. This is useful when you repeatedly need the same region, such as a character silhouette for adding shading, light and color passes.

Saved selections are kept with the session, so for long-term reuse many artists also keep a hidden layer filled with a flat color in the shape of the subject. Tapping it with Automatic selection recreates the selection instantly, even after closing the file.

Selections in Everyday Painting

Beyond big edits, selections speed up small, routine tasks: keeping a background gradient behind a character, adding pattern inside clothing, recoloring one flower in a bunch, or painting crisp highlights along a single edge. The more often you reach for the tool, the more natural it feels to “fence off” an area before painting into it.

Useful Shortcuts

  • Select layer contents: in the Layers panel, tap a layer thumbnail and choose Select. Everything on that layer becomes selected.
  • Quick copy: with a selection active, three-finger swipe down and choose Copy, then Paste.
  • Clear selection: tap the Selection icon again or tap Clear.
  • Undo selection points: in Freehand point mode, two-finger tap removes the last point.

Common Problems and Fixes

Automatic selection grabs too much

Lower the threshold by sliding left while holding. If the region connects to other areas through a tiny gap, close the gap or use Freehand with Remove to trim.

Painting does nothing

You may have selected an area on a different part of the canvas, or Invert may be active. Check the striped overlay to see what is protected. Also confirm you are on the correct layer.

Jagged edges after selecting

Automatic selection follows pixel boundaries and can look rough on soft, painterly edges. Add a little Feather, or refine the selection with Freehand. For final cut-outs, a layer mask gives more control because you can paint the edge by hand.

The selection disappeared

Switching some tools or tapping the Selection icon clears active selections. Save complex selections before trying something risky.

Selections vs Layer Masks vs Alpha Lock

All three restrict where changes happen. Choosing the right one saves effort.

ToolWhat it restrictsReversible?Use when
SelectionAny area you defineTemporaryQuick, one-off targeted edits
Alpha LockExisting pixels on the layerToggle on and offShading inside shapes you already painted
Clipping MaskPixels of the layer belowFully editableSeparate shading or texture layers
Layer MaskVisibility via black and white paintingFully editableHiding parts without deleting pixels

Selections are the most flexible for immediate edits, while masks are better for anything you may want to revisit. Combining them is common: make a selection, then fill the mask with black inside it to hide part of a layer cleanly.

Tips for Cleaner Results

  • Zoom in for Freehand. Tracing at higher zoom gives more accurate edges.
  • Use Reference for line art. Automatic selection becomes very precise with a reference layer.
  • Work on duplicates for big transformations so you can always go back.
  • Combine modes using Add and Remove rather than trying to get it perfect in one pass.
  • Feather sparingly on hard-edged graphic styles; it can blur lines you want crisp.

Selections also make atmospheric effects easier. Isolating the sky before adding soft gradients is a key step in our tutorial on painting clouds in Procreate, where clean boundaries keep the horizon sharp.

Thinking About Other Software?

Procreate’s selection tools are capable but simpler than those in desktop editors, which often include features like magnetic lassos, select-by-color-range across all layers and refine-edge tools for hair. If you need those for detailed cut-out work and also use a Windows PC, our guide to Procreate alternatives on Windows compares programs with deeper selection features.

FAQs

How do I select something in Procreate?

Tap the S-shaped Selection icon in the top toolbar, choose a mode such as Automatic or Freehand, and mark the area. The rest of the canvas is protected until you clear the selection.

How do I select and move part of a drawing in Procreate?

Select the area with Freehand, then tap the Transform arrow. Drag to move, use the corner nodes to resize, and tap Transform again to finish.

How do I deselect in Procreate?

Tap the Selection icon again or tap Clear in the selection toolbar. Switching to certain tools also clears the selection.

How do I change the selection threshold?

In Automatic mode, tap and keep your finger or stylus on the canvas, then slide right to increase or left to decrease the threshold. The blue preview updates as you slide.

Can I select all of one color in Procreate?

Automatic mode selects connected pixels of similar color. It does not select matching colors in disconnected areas in one tap, but you can tap additional regions while Add is active.

Why are my selection edges jagged?

Automatic selections follow pixel edges and can look rough on soft brushwork. Add a small Feather amount or refine with Freehand, or use a layer mask for full control.

Final Thoughts

The Selection tool rewards a simple approach: pick the mode that matches the shape, refine with Add and Remove, feather gently and save anything complex. Paired with Reference layers and masks, it turns fiddly edits into quick, controlled changes.

If your projects demand more advanced cut-out and selection features than an iPad app offers, it is worth comparing desktop programs before committing. Our roundup of the best Procreate replacements for PC users can help you find a good fit.

Facebook
Pinterest
Twitter
LinkedIn
Reddit
Telegram
Picture of Md Jomiruddin Sobuj

Md Jomiruddin Sobuj

Md Jomiruddin Sobuj is the founder and editor of PaintingProGuide. He comes to art supplies from digital publishing rather than from a studio, and the site reflects that: every guide here is built from manufacturer specifications, product documentation and the patterns that show up across hundreds of real user reviews — the details that predict how a brush, a paint or an easel actually behaves once you are using it. He writes or edits every article on the site and is accountable for what each one says, including telling you when a product is wrong for you. Corrections and questions are genuinely welcome at contact@paintingproguide.com.

Related Post

Practical digital fur texture tips: shade the form, build clumps, break the
Design and paint a convincing dragon in acrylic, with real-animal anatomy, scale
A ten-step realistic eye study in acrylic, covering anatomy, a limited palette,
Tape and masking materials compared, an eight-step method for crisp lines and

Leave a Reply

Your email address will not be published. Required fields are marked *

Picture of Paintingproguide

Paintingproguide

Painting

Welcome to PaintingProGuide, your ultimate resource for all things related to painting! Whether you’re a seasoned artist or just starting out, our mission is to inspire, educate, and empower you to create your best work. We believe that everyone has the potential to be an artist, and our goal is to help you unlock your creativity and achieve your artistic dreams.

Recent Posts